Classic Boattail Speedster Customer Assembled Vehicle Pricing  

 

Rolling package shown with optional taillights, wheels, grill mesh, and bumpers.

 

50% deposit required on all items
Prices are F.O.B. Largo, FL

You will need to have an extensive knowledge of automobile assembly to attempt to build a Coffin Nose Kit for yourself. This car is by far one of the most difficult and time-consuming project kit cars. If you purchase any one of the Coffin Nose Kits listed below, there will be no bodywork done to the bodies. If stated, parts will be fit and contoured, but beyond that, you are responsible for the finish on the body. We must note that as of this time we do not have an assembly manual for this automobile, but feel free to call us for tips or ideas on planning your project.
Prices are subject to change without notice.

 

Raw Body: PRICE: $12,500.00

Core Package: PRICE: $17,500.00

Classic Boattail Speedster body complete (Raw) (main body, front L & R fenders, rear L & R fenders, L & R doors, grill shell, L & R hood tops, L & R hood bottoms (fiberglass), L & R running boards, convertible top lid, dash, dash top), hood hinge & saddles, door hinges, door latches, door strikers, deck lid hinges, windshield frame (including windshield top pieces and center cap)

Ideal if you plan on using your own donor car or chassis

Sub-Frame Package: PRICE: $24,500.00

Core package plus sub-frame chassis. Body fit on sub-frame chassis (Speedster GenIII Chassis*)(no suspension), aluminum hoods and side panels, (doors hung and fit, hood hung and fit, deck lid fit, windshield fit, door latches & strikers), body mounts, fender braces, and radiator support rods.

 

Rolling Package: PRICE: $32,900.00

Sub-Frame package plus all suspension components.  Independent rear suspension as well as front suspension all fit and mounted.  Full coil-coil over shocks and springs installed.  Comes with motor mounts and rear end adapter plate.

 

Parts Packages

Casting Package $2,500
Seat $1,200
Bumpers w/Support Bars $2,500
Interior Package $1,500
Hardtop $1,500

 

You can purchase everything else you will need to assemble your Boattail Speedster Kit through us, we stock a full line of aftermarket parts and accessories! CALL US TODAY 727.584.3606

 

 

* Speedster GEN III Chassis is fully fabricated in house.  It is a 4” x 2” box aluminum tube frame with coil-over carrera shocks, late model Chrysler 300 independent rear axle, and custom Mustang II style front suspension with GM brakes.

 

INQUIRE ABOUT OUR FOUR PASSENGER MODEL

 

 

 

REASONS TO PURCHASE A NEW REPLICA BOATTAIL SPEEDSTER INSTEAD OF A USED ONE:

You might here a lot from different dealers across the country say the following, “Why buy a new replica Boattail Speedster from Speedster Motorcar Sales when you can purchase my 20 year old replica Boattail Speedster for less money?” 

 

HERE ARE SOME REASONS WHY

 

THEIR OLD REPLICA

  • Donor Chassis (usually 70’s or 80’s model GM or Ford Chassis hacked together to make a frame).
  • Fiberglass Hoods and Side Panels that are warped and wavy.
  • Poor wiring that usually resembles a nest of wires when you look under the dash.
  • Old engine that the dealer claims is a ‘350 Chevrolet’ when it could possibly be any number of small block engines and could possibly have well over 100k miles on it.
  • A car that possibly could have been assembled by someone in his or her garage.
  • A Cramped interior compartment that was designed for someone that lived in 1935.
  • Paint that generally is a lacquer or enamel base that will fade or has faded over time.
  • Flimsy side curtain protection if nothing at all.
  • Interior heater that doesn’t work.
  • Pitted chromed castings
  • Rusty Steel Bumpers
  • Old faded interior seats and carpeting.

OUR NEW REPLICA

  • New GEN II (Steel) or GEN III (Aluminum) Chassis with Coil Over Suspension, New Brakes, Custom Radiator, Custom Fuel Tank, Etc.
  • New All Aluminum hoods and side panels that completely take away the effect that heat has on fiberglass.
  • High Quality wiring harnesses custom made for each vehicle to ensure when you turn the lights on, they come on.
  • A brand New crate motor directly from GM with a New GM Automatic Transmission.
  • A true factory assembled automobile that gets fully test-driven and is subject to a 72-point checklist before it leaves our facility.
  • An oversized interior compartment that is a better fit for greater room and comfort.
  • A high dollar, high quality urethane basecoat/clearcoat finish that you would expect to find on a luxury automobile.
  • Full power windows.
  • Brand New Climate Control System with AC and Heat.
  • High Quality Silicone Bronze castings with high quality triple chrome plating.
  • Fully polished Stainless Steel Bumpers and trim.
  • New hand picked leather hides and high quality automotive carpets.

These are just a few reasons why our car is much better then theirs.  Go and test drive what they are offering then come drive ours.  You will see what a difference 32 years of engineering has done to make this replica Boattail Speedster the best that has ever been on the planet.

TURNKEY SPECIFICATIONS

 

Specifications for the Classic Auburn Speedster Replica:

  • Engine: GM V-8

  • Transmission:  GM 700R4 Automatic

  • Wheelbase: 126"

  • Overall Length: 215"

  • Weight: 3200 lbs.

  • Body: Hand-Laid Fiberglass

  • Chassis: Tubular Steel

  • Suspension: Coil Springs

  • Brakes: Power - Four Wheel Disc

  • Steering: Rack-n-Pinion

  • Cooling System: 14 quart capacity

  • Fuel Tank: 16 Gallon Capacity

  • Wheels:  Wire Spoke (optional)

  • Tires: White Wall 3" (optional)

  • Instruments: Stewart Warner Gauges

  • Stereo: State of the art AM\FM with CD player

  • Climate Control: Air Conditioned with Integral Heater

  • Parking Lights and Turn Signals:  Cowl Mounted

  • Dual Road Lights: Bumper mounted

  • Hood side Louvers: Stainless Steel

  • Interior: Genuine Leather

  • Carpet: High Quality Autimotive

  • Firewall: Mirrored Stainless

  • Convertible Top: Vinyl or Canvas (optional)

  • Steering Wheel: Leather, Burl or Carbon Fiber Banjo

  • Storage: Carpeted storage behind seats

  • Paint: Basecoat / Clearcoat

  • Hard Top: (optional)

  • Exhaust System: Dual lifetime turbo mufflers

  • NADA REGISTERED

* Each vehicle is test driven and checked bumper to bumper before it leaves our facility.